Product Details
POWER ROLL GROOVER(TWG-IIA）
TWG-IIA Power roll groover is made to groove pipe and tubing especially carbon steel pipe and stainless steel pipe. The roller groover is formed by the hydraulic feeding of a grooving rollers into the pipe which is supported by an electrical motor.
PRODUCT FEATURE AND APPLICATION
Customizable motor
Power is very important for the power roll groover, we can provide power in different voltage and frequency according to customers’ requirement, no matter in factories or on building sites. We provide different plug style as well, such as British plug, American plug, industrial plug and so on.
PHASE |
VOLTAGE |
FREQUENCY |
SINGLE PHASE |
110V~127V |
50/60Hz |
220V~240V |
THREE PHASE |
220V~240V |
380V~400V |
405V~440V |
NOTE: Extension cord requirement. when pre-wired outlets are not available and an extension cord must be used, it is important to use the proper cord size (gauge). Cord size selection is based upon tool rating and cord length. Use of a cord size (gauge) thinner than required will cause significant voltage drop at the motor while the tool is operating. Voltage drops may cause damage to the motor and can result in improper tool operation.
Listed in the chart below are recommended cord size (gauge) for cord lengths up to and including 31 meters . Use of extension cords beyond 31 meters in length should be avoided. Extension cords must meet all applicable local codes and facility rules for safe and proper use.
Cord Lengths |
8 meters |
15 meters |
31 meters |
Cord Size (Gauge) |
12 gauge |
12 gauge |
10 gauge |
High efficiency
Power roller groover means high efficiency compared with manual roll groover, this machine can finish one groove on 2inch SCH40 carbon steel pipe within 50~80 seconds, the below is the corresponding groove time.
GROOVING TIME (Unit: Second) |
PIPE SIZE |
SCH10 PIPE |
SCH20 PIPE |
SCH30 PIPE |
SCH40 PIPE |
2" |
50~75 |
/ |
50~80 |
50~80 |
3" |
90~120 |
/ |
90~125 |
90~130 |
4" |
120~150 |
/ |
120~155 |
120~160 |
5" |
120~160 |
/ |
/ |
160~200 |
6" |
120~160 |
/ |
/ |
180~220 |
8" |
160~200 |
180~240 |
200~260 |
220~300 |
10" |
180~220 |
180~260 |
200~280 |
240~300 |
12" |
200~240 |
200~280 |
240~300 |
240~320 |
The standard equipment
1 Machine with Motor and Hydraulic Pump
1 Pipe Stand
1 Roll Set Assembly (2 upper Rollers and 3 down rollers)
1 Go/No-Go Grooved Pipe Diameter Tape
1 Operating and Maintenance Instructions Manual
1 Tool bag with repair parts
TWG-IIA Power roll groover, customers need to pay more attention to safety operation. Although these tools are designed and manufactured for safe, dependable operation, it is difficult to anticipate all combinations of circumstances that could result in an accident. Do not operate electric tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep floors dry and free of slippery materials such as oil. Slippery floors invite accidents. To summarise, Read and understand all instructions before operation. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
http://www.pipetooltuwei.com/
Company Profile
